The TKR 6” series signs are 24 dots (pixels) high.  The active sign face is 6”.  The sign height is 9.96”, depth is 3.5”, and the length is unlimited using card size increments of 6” inches (20 columns).   This is a good size for most lobbies and meeting room areas, easy to read but not overwhelming.  The 6” TKR’s flexible configuration (one or two sided) can be easily suspended from a ceiling and the support conduits can be used to deliver the power and data feeds invisibly.   The 6” TKR weighs a negligible 4.5 lbs per linear foot for a single side and 5.5 lbs for a double-sided unit. 

TKR SERIES GENERAL

The TKR series signs are dynamic visual elements, and often used in with a functional second side.  The TKR is capable of working in series or independently.  The TKRs can accept data from a central information source or subscription data feed, local or Ethernet, ASCII or BITMAP. 

The LEDs used in the TKR series have been carefully chosen for brightness and consistency.  Individual signs and sign groups, no matter the color, are always made
from the same manufacturer, from the same binning, down to the same lot number to guarantee the uniformity that makes these signs visually superior.  The standard LED colors are: red, green, amber, blue, and white. 

The TKR chassis features a flexible configuration and is designed with the capability to fit a multitude of architectural situations.  The chassis are straight or curve-able and have no length limitations.  The TKR’s ability to easily adapt to convex, concave, right-angle, or combination surfaces during on-site installation make it a natural for designers and architects.  The sign cards and internal components can be kitted for direct installation without a chassis to fit into a prepared wall cavity or other shallow area.  The power supplies and CPU boards, etc can be off-boarded to another location as long as it is within a reasonable distance (10 feet or less).